TMR Block

Advance Hydrau-Tech. has been in the recycling process since 1981, and our organization is backed by rich industry experience of more than 31 years in this field. With the latest advanced technological methods, we have become a leading manufacturer, supplier and exporter of a wide range of Machines for Agro Wastes. One of our product is Densified TMR Blocks is a new concept of Feeding Animals with wholesome and Complete Ration.
Technical Specifications :

BALE SIZE		16" x 20" x 6"
ELECTRIC MOTOR		30 HP - 1440 RPM
ELECTRIC CONTROL PANEL		PROVIDED
WEIGHT OF THE BLOCK		13 - 15 KGS
IDEAL CYCLE TIME		45 - 50 SECS
OIL TANK CAPACITY		700 LTRS
OPERATION OF THE MACHINE		BY PLC - CONTROLLED PANEL
NUMBER OF BLOCKS / HOUR		65 - 75
OIL CHILLER		PROVIDED

Mechanical Nibbler

We are engaged in the manufacture of high-tech Hydraulic Shearing Machine for the national and international markets. Our mission is to provide high quality Engineering Machinery at market competitive prices to the valuable clients.Its only our strong infrastructure, skilled workforce and a well-coordinated network serve that we are able to supply more than 50 countries across the globe .


Technical Specifications :

BLADE		" V" SHAPED
NUMBER OF STROKE		30 - 36 / MINUTE
ELECTRIC MOTOR		5 H.P.
OIL DRIVE		PLUNGER CUM GEAR PUMP
BLADE OPENING		4"
SPARE		1 SET BLADE
OPERATION		CONTINOUS CYCLE
STARTER		PROVIDED
OVERALL DIMENSION		60" x 25" x 40" (H x W x L) (APPROX)

Baling Press - Triple Compression Model

We provide a wide range of Jumbo High Density Baler that are manufactured with the help of experienced engineers using quality grade raw material procured from certified agencies. Our range of Jumbo High Density Baler is fabricated as per the international quality standards and is extensively used in various industrial application because of the updated features so built in them. These are widely demanded & supplied and have acclaimed positive feedback from the customers. Some of the special features of the Balers are:
• Performance oriented
• Longer functionality
• Versatile application areas


Technical Specifications :

BALING CHAMBER	30" x 38" x 74" (H x W x L)
OPENING OF TOP LID	38" x 57" (W x L)
BALE SIZE	14" x 14" x 8-10" (H x W x L)
ELECTRIC MOTOR	50 H.P. 3 PHASE 1440 RPM
BODY	FABRICATED
OIL DRIVE	VANE CUM AXIAL PISTON PUMP
WORKING LIQUID	HYDRO/ENCLO - 68 (NOT IN OUR SCOPE)
FORCE ON LID	70 TONS
FORCE ON MAIN CYLINDER	(70 X 2 NOS.) 140 TONS
FORCE ON SIDE CYCLINDER	200 TONS
FORCE ON EJECTER	12 TONS
WORKING PRESSURE	4000 PSI
HARD LINER PLATES	PROVIDED
SHEARING BLADES	SERRATED TYPE
ELECTRICAL PANEL	PROVIDED
WEIGHT OF THE BALE	60-120 KGS (IN MS) & 25-40 KGS (IN ALUMINIUM) (APPROX)
IDLE CYCLE TIME	100 – 110 SECONDS (APPROX)
WEIGHT OF THE MACHINE	13 TONS (APPROX)
OIL TANK CAPACITY	90 - 100 SECONDS (APPROX)
WEIGHT OF THE MACHINE	23 TONS (APPROX)
OIL TANK CAPACITY	1,200 LTS. (APPROX)
EJECTION OF BALE	BY TURNOUT
ONLINE OIL CHILLER	PROVIDED
ONLINE OIL FILTERATION SYSTEM	PROVIDED
OPERATION OF THE MACHINE	PLC CONTROLLED THROUGH TOUCH SCREEN. TOGGLE SWITCH ALSO PROVIDED FOR OPERATION IN CASE OF EMERGENCY/REPAIR.

Shredders

Advance Hydrau-Tech: We offer wide range of shredders that are specially designed to meet the demands of waste treatment plants and other industries. Manufactured with highest level of precision material, these are sturdy in construction, durable and easy to install. Our range of shredders process a mixed range of equipment to recover different materials, primarily metals. Moreover, these shredders are available in different specifications and also customized as per clients'' needs.



Technical Specifications :

MODEL				AH - 40	AH - 60	AH - 100	AH - 150
CAPACITY - TURNINGS				2 - 3 TONS	3 - 5 TONS	5 - 7 TONS	---
CAPACITY - LIGHT SCRAP				1 - 1.5 TONS	1.5 - 2 TONS	2 - 3 TONS	3 - 4 TONS
MOTOR (SLIPRING)				40 H.P.	60 H.P.	100 H.P.	150 H.P.
MOTOR RPM				960	960	960	960
WEIGHT				3.5 TONS APPROX	4.5 TONS APPROX	7 TONS APPROX	11 TONS APPROX
FEEDING MOUTH				18" x 24"	24" x 30"	30" x 36"	30" x 36"
FLOOR SPACE REQURED				7' x 7'	9' x 9'	10' x 10'	11 x 11'

Single Compression Model

We provides Horizontal type single compression scrap machines which is mainly used for reducing only single dimension of the metallic scrap. It uses the compression force generated by the hydraulic cylinder.Designed in line with international quality standards, our range finds wide application in steel and aluminum industries. These horizontal single compression scrap baling presses are renowned for optimum performance, robust construction and long service life. Our range comes in big, medium and small sizes as per the customers specifications.Technical Specifications :

BALING CHAMBER	12" x 16" x 45" (W x H x L)
BALE SIZE	12" x 16" x 4-6" (W x H x L)
ELECTRIC MOTOR	15 HP 3 PHASE 1440 RPM
OIL DRIVE	PLUNGER PUMP
WORKING LIQUID	HYDRO/ENCLO - 68 (NOT IN OUR SCOPE)
FORCE ON MAIN CYLINDER	75 TONS
WORKING PRESSURE	3300 PSI
WEIGHT OF THE BALE	20 - 35 KGS.
IDLE CYCLE TIME	80 - 85 SECONDS (APPROX)
WEIGHT OF THE MACHINE	2.5 TONS (APPROX)
OIL TANK CAPACITY	200 LTS.

Triple Compression Jumbo Plus Turn Out Type

Over 30 years, Advance Hydrautech was known as manufacturers and exporters in wide range of Balers across the globe to compress waste scraps and produce bundle on top.
Technical Specifications :

BALING CHAMBER	40" x 48" x 84" (H x W x L)
BALE SIZE	20" x 20" x 10-20" (H x W x L)
ELECTRIC MOTOR	2 x 40 H.P. 3 PHASE 1440 RPM
BODY	FABRICATED
OIL DRIVE	GEAR CUM AXIAL PISTON PUMP
WORKING LIQUID	HYDRO/ENCLO - 68 (NOT IN OUR SCOPE)
FORCE ON LID CYCLINDER	120 TONS (60 X 2)
FORCE ON MAIN CYLINDER	200 TONS (100 X 2)
FORCE ON SIDE CYCLINDER	170 TONS
THICKNESS OF THE PRESSURE PLATE	24"
FORCE ON EJECTOR CYCLINDER	12 TONS
TYPE OF EJECTION	TURNOUT TYPE
WORKING PRESSURE	3300 PSI
HARD LINER PLATES	PROVIDED
SHEARING BLADES	PROVIDED
STARTERS	PROVIDED 2 NOS.
WEIGHT OF THE BALE	150 - 240 KGS.
IDLE CYCLE TIME	100 - 110 SECONDS (APPROX)
WEIGHT OF THE MACHINE	23 TONS (APPROX)
OIL TANK CAPACITY	1800 LTS.
OPERATION	BY CONTROL DESK WITH PLC CONTROL (SOLONOID VALVES, PROXIMITY SWITCHES, PRESSURE SWITCHES ETC.)

Triple Compression Jumbo Plus Top Ejection

Advance Hydrau-Tech. Pvt. Ltd. : We are the rich industry experience of more than 31 years in-house manufacturing and design facilities and with emphasis on total quality control, for which we are enabled us to offer our clients an extensive range of Machines for Ferrous/Non-Ferrous Metal Scrap, Machine for Paper Waste, Machines for Agro Waste, Double Compression Baler, Double Compression Scrap Baler, Triple Compression Metal Scrap Baler,Shearing Machines, Briquette Machine and Nibblers as per the customers specifications.



Technical Specifications :

BALING CHAMBER	40" x 48" x 84" (H x W x L)
BALE SIZE	20" x 20" x 10-20" (H x W x L)
ELECTRIC MOTOR	2 x 40 H.P. 3 PHASE 1440 RPM
BODY	FABRICATED
OIL DRIVE	GEAR CUM PLUNGER PUMP
WORKING LIQUID	HYDRO/ENCLO- 68 (NOT IN OUR SCOPE)
FORCE ON LID CYCLINDER	120 TONS (60 X 2)
FORCE ON MAIN CYLINDER	200 TONS (100 X 2)
FORCE ON SIDE CYCLINDER	170 TONS
THICKNESS OF THE PRESSURE PLATE	24"
FORCE ON EJECTOR CYCLINDER	12 TONS
TYPE OF EJECTION	TOP EJECTION
WORKING PRESSURE	3300 PSI
HARD LINER PLATES	PROVIDED
SHEARING BLADES	PROVIDED
STARTERS	PROVIDED 2 NOS.
WEIGHT OF THE BALE	150 - 240 KGS.
IDLE CYCLE TIME	100 SECONDS (APPROX)
WEIGHT OF THE MACHINE	25 TONS (APPROX)
OIL TANK CAPACITY	1800 LTS.
OPERATION	BY CONTROL DESK WITH PLC CONTROL SECOND VALVES, PROXIMITY, PRESSURE SWITCHES ETC.)

Horizontal Paper Baler

An extensive selection of baling equipment for balers, Horizontal balers is one of them. For higher production levels and automatic operation , a horizontal baler can make your waste recycling operation more efficient and in a convenience way.

Advance Hydrau-Tech manufacturing understands the horizontal baler equipment demands of our recycling and waste handling customers.Over 30 years, We build high quality horizontal balers that bale non-ferrous scrap metal.


Technical Specifications :

BALE SIZE	(B) 30" X (H) 42" X (L) V
BALING CHAMBER SIZE	(B) 30" X (H) 42" X (L) 80"
BALE HOLDING CHAMBER SIZE	(B) 30 " X (H) 42" X (L) 160"
BALE WT.	200 – 750 K.G. APPROX.
FORCE EXERTED ON RAM	150 TONS
IDLE CYCLE TIME	40 SEC FOR SINGLE STROKE
ESTIMATED PRODUCTION	3 TO 6 TONS/HR (DEPEND ON MATERIAL)
WORKING PRESSURE	3000 PSI MAX.
MAIN CYLINDER STROKE	75"
MAIN CYLINDER BORE	10"
NO. OF CYLINDERS	3
OIL DRIVE	AXIAL PISTON CUM VANE PUMP
ELECTRIC MOTORS	50 H.P 1440 R.P.M. 50 KHZ 7.5 H.P. X 2NOS. 1440 R.P.M
OIL TANK CPACITY	2000 LTRS
NO. OF TIES	4
OVERALL DIMENSION	(L) 35' X (B) 50' X (H) 20'
APPROX. SHIPPING WT	25 TONS
RECOMMENDED SPARES	FOR 1 YEAR

Single Cylinder Vertical Paper & Plastic baler

Advance Hydrau-Tech : We are a industrial baler manufacturer and exporter across the globe since 1981.When it comes to plastic recycling equipment, plastic balers are right at the top of the list. If you need a plastic baler for your plastic recycling business, you can save time and money with a complete turn-key baling solution, work to combine this innovative engineering with our use of only the highest quality components. The result is the very best durability and function for your plastic recycling equipment.

Technical Specifications :

CHAMBER SIZE	24" X 36" X 60" (L X W X H)
PRESSURE ON RAM	50 TONS
BALE SIZE	24” X 36” X V
BALE WEIGHT	40 – 80 KG
OIL DRIVE	GEAR CUM PLUNGER PUMP
NO. OF TIES	3
ELECTRIC MOTOR	10 H.P 1440 R.P.M
CYCLE TIME	60 SECONDS
MACHINE WEIGHT	3000 KG

Double cylinder vertical Plastic & paper baler

Double cylinder vertical hydraulic Baler widely used to compressing and packing the relaxed goods such as cotton, yarn, cloth, hemp, wool and other products. Advance Hydrau-Tech offers you a wide array of new vertical balers.



Technical Specifications :

BALING CHAMBER SIZE	30" x 48" x 68" (D x W x H)
FEED OPENING	12" x 48" (SAFETY BY SLIDING MESH DOOR)
PRESSURE ON RAM	32.5 X 2 (65 TONS)
BALE SIZE	30” X 48” X V
BALE WEIGHT	100 – 250 KG (IN OCC)
OIL DRIVE	GEAR CUM PLUNGER PUMP
WORKING PRESSURE	2500 PSI
NO. OF TIES	4 NOS. (SPACE PROVIDED)
ELECTRIC MOTOR	30 H.P 1440 R.P.M.
CYCLE TIME	30 SECONDS (IDLE CYCLE)
EJECTION	BY WIRE ROP THROUGH MAIN CYLINDER
OPERATION	BY PUSH BUTTON
WEIGHT OF THE MACHINE	5.5 TONS (APPROX)
OVER ALL DIMENTIONS	4.5’ x 5.5’ x 13.5 (D x W x H) (APPROX)

Double Compression Auto Door (Export) (Ah-006)

ADVANCE HYDRAUTECH PVT. LTD. : Hydraulic Baling Press With Double Compression ... Hydraulic baling presses with auto door offered you in wide range and are designed for processing ferrous or non-ferrous ...



Technical Specifications :

FRONT DOOR	AUTO
BALING CHAMBER	24" x 24" x 50" (W x H x L)
BALE SIZE	12" x 24 " x 5-8" (W x H x L)
ELECTRIC MOTOR	30 HP 1440 RPM (AHT)
BODY	FABRICATED
OIL DRIVE	GEAR CUM AXIAL PISTON PUMP
WORKING LIQUID	HYDRO/ENCLO - 68 (Not in Our Scope)
FORCE ON LID CYCLINDER	40 TONS (Approx)
FORCE ON MAIN CYLINDER	95 TONS (Approx)
WORKING PRESSURE	3300 PSI
HARD LINER PLATES	PROVIDED
SHEARING BALDES	PROVIDED
ELECTRIC STARTER	PROVIDED
WEIGHT OF THE BALE	40 - 60 KGS. (IN M.S.) 15 - 25 KGS. (IN ALUMINIUM)
IDLE CYCLE TIME	60 SECONDS (APPROX)
WEIGHT OF THE MACHINE	5-5 TONS (APPROX)
OIL TANK CAPACITY	600 LTS.

PET BOTTLE (VERTICAL BALER)

This is Baler is used to compress waste scraps.

Technical Specifications :

CHAMBER SIZE	20" x 28" x 70" (L x W x H)
BALE SIZE	20” x 28” x V (L x W x H)
BALE WEIGHT	40 - 60 KGS
FORCE ON RAM	28 - 30 TONS
BODY	FABRICATED
OIL DRIVE	GEAR PUMP x 2 NOS.
WORKING LIQUID	HYDRO/ENCLO-68
WORKING PRESSURE	2200 PSI
CYLINDER BORE	6"
ELECTRIC MOTOR	15 HP
IDLE CYCLE TIME	35 - 40 SECONDS (APPROX)
NUMBER OF TIES	3 NOS. (SPACE PROVIDED)
EJECTION	WIRE ROPE THROUGH MAIN CYLINDER
OPERATION OF THE MACHINE	MANUAL THROUGH LEVERS
ELECTRIC STARTER	PROVIDED
OPTIONAL
OIL CHILLER	2 TON OIL CHILLER TO KEEP THE OIL COOL
OPERATIONS (AUTO CONTROLS)	BY PUSH BUTTON PENDENT (SOLONOID VALVES, LIMIT SWITCHES, PRESSURE SWITCHES ETC.)

Triple Compression Super Baler Turn Out

ADVANCE HYDRAU-TECH PVT. LTD. : We are the leading manufacturer and exporter of aluminum scrap baling press, Baler, shearing machines, briquette machine and nibblers in India and Overseas over the 30 years of experiences. We offers you the most outstanding selection of baling equipment keeping in mind the quality and competitive prices of market today.


This baler is used to compress waste scraps with triple compression model.

Technical Specications :

BALING CHAMBER	24" X 30" X 57" (H X W X L)
BALE SIZE	12" X 12" X 5-8" (H X W X L)
ELECTRIC MOTOR	30 H.P 3 PHASE 1440 RPM
BODY	FABRICATED
OIL DRIVE	GEAR CUM AXIAL PISTON PUMP
WORKING LIQUID	HYDRO/ENCLO-68 (NOT IN OUR SCOPE)
FORCE ON LID CYLINDER	40 TONS
FORCE ON MAIN CYLINDER	75 TONS
FORCE ON SIDE CYLINDER	120 TONS
FORCE ON EJECTOR CYLINDER	12 TONS
WORKING PRESSURE	3000 PSI
HARD LINER PLATES	PROVIDED
SHEARING BLADES	PROVIDED
STARTER	PROVIDED
WEIGHT OF THE BALE	50-80 KGS (IN MS) 20-30 KGS (Aluminium)
IDLE CYCLE TIME	75 - 80 SECONDS (APPROX)
WEIGHT OF THE MACHINE	7 TONS (APPROX)
OIL TANK CAPACITY	600 LTS.
OPERATION OF THE MACHINE	MANUAL THROUGH LEVERS

Mechanical Shearing Machines

Our specialization lies in the supplying and exporting of a wide range of Mechanical Shearing machines that is reckoned for its simple setup, good tolerances, high tensile strength and durability. Available in standard and customized configurations, these mechanical shearing machines are offered to our clients as per their specific requirements.For more details visit us at : http://www.advancehydrautech.com/





Technical Specifications :

BLADE SIZE		12"
CUTTING CAPACITY		20 mm ROUND
NUMBER OF STROKE		36 / MINUTE
BLADE OPENING		5"
MOTOR		5 HP - 3 PHASE - 1440 RPM
FLY WHEEL		25" DIA
WEIGHT OF THE MACHINE		1000 KGS APPROX
OVER ALL DIMENSION		60" x 25" x 40" (L x W x H)
OPERATION		CONTINIOUS CYCLE
STARTER		PROVIDED

Hydraulic Nibbler

Portable electric and air models Cut steel plate up to 3/8" thick. For Over 30 Years, ADVANCE HYDRAU-TECH PVT. LTD. manufactured and exports worldwide in a wide variety of configurations, sizes, and costs based on the quality material made by us.

















Technical Specifications:

BLADE		" V" SHAPED
NUMBER OF STROKE		14 - 16 / MINUTE
MOTOR		15 H.P. / 1440 RPM
PUMP		PLUNGER CUM GEAR PUMP
BLADE OPENING		4"
OPERATION		MANUAL BY PUSH BUTTON BY PEDAL SINGLE CYCLE FULL AUTO
WORKIGN PRESSURE		2400 PSI (APPROX)
OIL TANK CAPACITY		200 LTR (APPROX)
MACHINE WEIGHT		2500 KG
SPARE		1 SET BLADE
STARTER		PROVIDED
OVERALL DIMENSION		4’ X 3’ X 7’ (H X W X L) (APPROX)